The Intelligent MIC control unit (IMCU) EC-912-25 gives you the possibility to remotely control your MIC Smoke Measuring Equipment Type EC-912 through a standard RJ45 Ethernet or USB network connection.
The IMCU is a plug-in replacement for the original MCU Controller EC-912-20. It provides the same external interfaces and offers remote control of calibration and operation using an Ethernet or USB connection.
The system is completely controllable through a XML-RPC protocol or partly by a Web interface both over a network connection.
The IMCU offers network control of the following MIC-functions
Command to adjust the chamber voltage (Uc) Command to automatically calibrate the MIC system Command to read the chamber voltage (Ux)
For general information regarding the complete MIC system, please contact us for the “Instruction manual for Smoke measuring equipment MIC type EC-912” (B-281-0006-XX).
For information regarding the XML-RPC interface, please contact us for the document “IMCU EC-912-25 XML-RPC protocol description” (B-281-0007-xx).
The MIC smoke measuring system type EC-912 consists of the following parts:
MIC smoke measuring head
Multi-cable, 10 m (other lengths on request)
MIC control unit with power supply
Flow control unit with filter
Accessories, instruction manual, etc.
The smoke measuring head is installed at the measuring site and connected to the control unit via the multi-cable. The control unit, flow control unit and power supply are housed in a cabinet, which can be placed in an operator room. The vacuum pump can be placed in a convenient location.
Plug and play compatible with MIC control unit EC 912-20
Full control able by a XML-RPC protocol
Control able by Web server
Physics connection by a RJ45 or USB connector
Not compatible with MIC calculator EC 913
Chamber quiescent current: 100 pA (nominal)
Chamber impedance: 1.9 x 1011 Ω ± 5%
Radioactive source: Am241
Activity: 129.5 kBq (3.5 μ Ci) ± 5%
Average a – energy: 4.5 MeV ± 5%
Time delay: < 10 sec. at 30 l/min. flow rate
The measuring head is calibrated against DELTA’s reference MIC within ± 3% smoke sensitivity
Calibration certificate is enclosed with each measuring head
19 inch bench top/rack cabinet with power supply for MIC
3.5 digit LED display of chamber voltage or smoke density
Manual zero and full-scale adjustment
Analogue outputs: X (0.0 – 10.0 VDC), chamber voltage Uc (14-25 VDC approx.)
Mains supply: 100-240 VAC, 50-60 Hz
Flow rate: Adjustable between 0 – 50 l/min.
Filter: Replaceable filter element
Mains requirements: 115 VAC ± 10%, 50-60 Hz or 230 VAC ± 10%, 50-60 Hz
Motor rating: Approx. 0.15 kW
Capacity: Approx. 60 l/min.